12-Outlet drip Manifold | TOP
Using the T.O.P 12-Outlet can save a significant amount of water by improving irrigation efficiency and lowering water runoff.
En savoir plus| No. de produit | No. Fournisseur | Flow rate per outlet | Color | ||
|---|---|---|---|---|---|
| IS DIGTOP-005 Choisir cette option | TOP-005 | 0.6 GPH | Black | Choisir cette option | |
| IS DIGTOP-010 Choisir cette option | TOP-010 | 1 GPH | Red | Choisir cette option | |
| IS DIGTOP-030 Choisir cette option | TOP-030 | 3.3 GPH | Violet | Choisir cette option |
Designed to retrofit a 1/2″ sprinkler riser, DIG’s TOP 12-outlet drip manifold utilizes extremely accurate, pressure compensating individual and interchangeable drip emitters to ensure equal flow from each outlet over a wide range of operating pressures from 10 to 80 PSI. Available with .6, 1, 2 and 3.3 GPH per outlet, the TOP can deliver water directly to up to 12 plants with less water evaporation and wind-drift than the overhead sprinkler heads it replaces. Using the TOP can save a significant amount of water by improving irrigation efficiency and lowering water runoff. For additional savings, check with your city for drip irrigation rebate program eligibility.
Features
- Constructed with 12 built-in individually pressure compensating drip emitters
- Self-flushing emitters allow passage of water and minimize clogging
- Interchangeable drip emitters for variable flow rates in a single head
- Color-coded drip emitters and barbs easily identify flow rate at each zone
- Each drip emitter individually filtered (approx. 80 mesh)
- Backup mini disk filter
- Rugged materials to withstand the most adverse conditions
Specifications
-
Install above grade or place below grade in a 6†emitter box
-
Inlet plugs provide the option to cap off up to eight drip emitters
-
Flow rates options: 0.6, 1, 2.2 and 3.3 GPH (2.2, 4, 8.3 and 12.5 L/H)
-
Pressure compensating range: 8-80 PSI (0.5 - 5.6 BAR)
-
Recommended operating pressure: 15-50 PSI (1 - 3 BAR)
-
Temperature range: up to 122°F (50°C)
-
Inlet size: 1/2†FNPT
-
Use with 1/8†(.187 OD) or 1/4†(.150 - .160 ID) distribution tubing